Sunrise Medical F45 Manuel d'utilisateur télécharger pdf (Page 34)

30F45 Issue 6

Parallel Swing Away Arm

Before adjusting the swing-away arm,

switch off the controller to avoid

accidental displacement of the

joystick which would cause unwanted

movement of your wheelchair.

Gently apply pressure to the side of the

controller nearest the user and as close as

possible to the front of the controller.

The controller will move outward and then

backward before reaching its fully back

position.

Keep your fingers and clothing, etc.,

clear while operating the swing-away

mechanism.

If required, your wheelchair can be

operated with the swing-away mechanism

in its fully back position, but only for slow

manoeuvering such as positioning the

wheelchair closer to table tops, etc.

To revert to the normal driving position,

switch off the power and pull the arm

outwards and then forwards before

returning the arm to its ‘home’ position.

Make sure the controller is fully engaged in

its home position before switching on and

operating the wheelchair in the normal

manner.

Caution

Do not hang any items on or over the

parallel swing-away remote assembly

as this could damage the swing-away

mechanism.

When transferring to and from the

wheelchair do not use the remote as a

means of support.

Warning

Keep fingers, clothing, etc., clear of

the swing-away mechanism at all

times.

Ensure the power is switched off while

adjusting the parallel swing-away arm.

Only operate the wheelchair at low

manoeuvring speed when the parallel

swing-away is in use.

Fig. 43

Fig. 44

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 61 62

Commentaires sur ces manuels

Pas de commentaire